• geothermal energy
    Geothermal energy isn't entirely renewable—it will run out when the Earth does. In about 5 billion years.

    Photograph by Sylvain Entressangle, My Shot

    Geothermal Powers
    These nations generate the most geothermal power, based on their percentage of total power produced (including fossil fuels and other renewable sources).
    1. Iceland (30%)
    2. Philippines (27%)
    3. El Salvador (25%)
    4. Costa Rica (14%)
    5. Kenya (11%)

    The Fumaroles
    There are no geysers at The Geysers, one of the most productive geothermal plants in the world. The California facility sits on fumarolesvents in the Earths crust where steam and other gases (not liquids) escape from the Earths interior.

    Ring of Geothermal
    Geothermal energy sources are often located on plate boundaries, where the Earths crust is constantly interacting with the hot mantle below. The Pacifics so-called Ring of Fire and East Africas Rift Valley are volcanically active areas that hold enormous potential for geothermal power generation.

    Balneotherapy is the treatment of disease by spa watersusually bathing and drinking. Some famous spas in the United States that offer balneotherapy include Hot Springs, Arkansas, and Warm Springs, Georgia. The most famous balneotheraputic spa in the world, Iceland's Blue Lagoon, is not a natural hot spring. It is a manmade feature where water from a local geothermal power plant is pumped over a lava bed rich in silica and sulfur. These elements react with the warm water to create a bright blue lake with alleged healing properties.

    Geothermal energy is heat that is generated within the Earth. (Geo means “earth,” and thermal means “heat” in Greek.) It is a renewable resource that can be harvested for human use.

    About 2,900 kilometers (1,800 miles) below the Earth’s crust, or surface, is the hottest part of our planet: the core. A small portion of the core’s heat comes from the friction and gravitational pull formed when Earth was created more than 4 billion years ago. However, the vast majority of Earth’s heat is constantly generated by the decay of radioactive isotopes, such as potassium-40 and thorium-232.
    Isotopes are forms of an element that have a different number of neutrons than regular versions of the element’s atom. Potassium, for instance, has 20 neutrons in its nucleus. Potassium-40, however, has 21 neutrons. As potassium-40 decays, its nucleus changes, emitting enormous amounts of energy (radiation). Potassium-40 most often decays to isotopes of calcium (calcium-40) and argon (argon-40).

    Radioactive decay is a continual process in the core. Temperatures there rise to more than 5,000° Celsius (about 9,000° Fahrenheit). Heat from the core is constantly radiating outward and warming rocks, water, gas, and other geological material.

    Earth’s temperature rises with depth from the surface to the core. This gradual change in temperature is known as the geothermal gradient. In most parts of the world, the geothermal gradient is about 25° C per 1 kilometer of depth (1° F per 77 feet of depth).

    If underground rock formations are heated to about 700-1,300° C (1,300-2,400° F), they can become magma. Magma is molten (partly melted) rock permeated by gas and gas bubbles. Magma exists in the mantle and lower crust, and sometimes bubbles to the surface as lava.

    Magma heats nearby rocks and underground aquifers. Hot water can be released through geysers, hot springs, steam vents, underwater hydrothermal vents, and mud pots.

    These are all sources of geothermal energy. Their heat can be captured and used directly for heat, or their steam can be used to generate electricity. Geothermal energy can be used to heat structures such as buildings, parking lots, and sidewalks.

    Most of the Earth’s geothermal energy does not bubble out as magma, water, or steam. It remains in the mantle, emanating outward at a slow pace and collecting as pockets of high heat. This dry geothermal heat can be accessed by drilling, and enhanced with injected water to create steam.

    Many countries have developed methods of tapping into geothermal energy. Different types of geothermal energy are available in different parts of the world. In Iceland, abundant sources of hot, easily accessible underground water make it possible for most people to rely on geothermal sources as a safe, dependable, and inexpensive source of energy. Other countries, such as the U.S., must drill for geothermal energy at greater cost.

    Harvesting Geothermal Energy: Heating and Cooling

    Low-Temperature Geothermal Energy
    Almost anywhere in the world, geothermal heat can be accessed and used immediately as a source of heat. This heat energy is called low-temperature geothermal energy. Low-temperature geothermal energy is obtained from pockets of heat about 150° C (302° F). Most pockets of low-temperature geothermal energy are found just a few meters below ground.

    Low-temperature geothermal energy can be used for heating greenhouses, homes, fisheries, and industrial processes. Low-temperature energy is most efficient when used for heating, although it can sometimes be used to generate electricity.

    People have long used this type of geothermal energy for engineering, comfort, healing, and cooking. Archaeological evidence shows that 10,000 years ago, groups of Native Americans gathered around naturally occurring hot springs to recuperate or take refuge from conflict. In the third century BCE, scholars and leaders warmed themselves in a hot spring fed by a stone pool near Lishan, a mountain in central China. One of the most famous hot spring spas is in the appropriately named town of Bath, England. Starting construction in about 60 CE, Roman conquerors built an elaborate system of steam rooms and pools using heat from the region’s shallow pockets of low-temperature geothermal energy.

    The hot springs of Chaudes Aigues, France, have provided a source of income and energy for the town since the 1300s. Tourists flock to the town for its elite spas. The low-temperature geothermal energy also supplies heat to homes and businesses.

    The United States opened its first geothermal district heating system in 1892 in Boise, Idaho. This system still provides heat to about 450 homes.  

    Co-Produced Geothermal Energy
    Co-produced geothermal energy technology relies on other energy sources. This form of geothermal energy uses water that has been heated as a byproduct in oil and gas wells.

    In the United States, about 25 billion barrels of hot water are produced every year as a byproduct. In the past, this hot water was simply discarded. Recently, it has been recognized as a potential source of even more energy: Its steam can be used to generate electricity to be used immediately or sold to the grid.

    One of the first co-produced geothermal energy projects was initiated at the Rocky Mountain Oilfield Testing Center in the U.S. state of Wyoming. The facility continues to produce about 200 kilowatts of power using fluids discarded from nearby petroleum and natural gas wells.

    Newer technology has allowed co-produced geothermal energy facilities to be portable. Although still in experimental stages, mobile power plants hold tremendous potential for isolated or impoverished communities.

    Geothermal Heat Pumps
    Geothermal heat pumps (GHPs) take advantage of the Earth’s heat, and can be used almost anywhere in the world. GHPs are drilled about 3 to 90 meters (10 to 300 feet) deep, much shallower than most oil and natural gas wells. GHPs do not require fracturing bedrock to reach their energy source.

    A pipe connected to a GHP is arranged in a continuous loop—called a "slinky loop"—that circles underground and above ground, usually throughout a building. The loop can also be contained entirely underground, to heat a parking lot or landscaped area.

    In this system, water or other liquids (such as glycerol, similar to a car’s antifreeze) move through the pipe. During the cold season, the liquid absorbs underground geothermal heat. It carries the heat upward through the building and gives off warmth through a duct system. These heated pipes can also run through hot water tanks and offset water-heating costs.

    During the summer, the GHP system works the opposite way: The liquid in the pipes is warmed from the heat in the building or parking lot, and carries the heat to be cooled underground.

    The U.S. Environmental Protection Agency has called geothermal heating the most energy-efficient and environmentally safe heating and cooling system. The largest GHP system was completed in 2012 at Ball State University in Indiana. The system replaced a coal-fired boiler system, and experts estimate the university will save about $2 million a year in heating costs.

    Harvesting Geothermal Energy: Electricity

    In order to obtain enough energy to generate electricity, geothermal power plants rely on heat that exists a few kilometers below the surface of the Earth. In some areas, the heat can naturally exist underground as pockets steam or hot water. However, most areas need to be “enhanced” with injected water to create steam.

    Dry-Steam Power Plants
    Dry-steam power plants take advantage of natural underground sources of steam. The steam is piped directly to a power plant, where it is used to fuel turbines and generate electricity.

    Dry steam is the oldest type of power plant to generate electricity using geothermal energy. The first dry-steam power plant was constructed in Larderello, Italy, in 1911. Today, the dry-steam power plants at Larderello continue to supply electricity to more than a million residents of the area.

    There are only two known sources of underground steam in the United States: Yellowstone National Park in Wyoming and The Geysers in California. Since Yellowstone is a protected area, The Geysers is the only place where a dry-steam power plant is in use. It is one of the largest geothermal energy complexes in the world, and provides about a fifth of all renewable energy in California.

    Flash-Steam Power Plant
    Flash-steam power plants use naturally occurring sources of underground hot water and steam. Water that is hotter than 182° C (360° F) is pumped into a low-pressure area. Some of the water “flashes,” or evaporates rapidly into steam, and is funneled out to power a turbine and generate electricity. Any remaining water can be flashed in a separate tank to extract more energy.

    Flash-steam power plants are the most common type of geothermal power plants. The volcanically active island nation of Iceland supplies nearly all its electrical needs through a series of flash-steam geothermal power plants. The steam and excess warm water produced by the flash-steam process heat icy sidewalks and parking lots in the frigid Arctic winter.

    The islands of the Philippines also sit over a tectonically active area, the "Ring of Fire" that rims the Pacific Ocean. Government and industry in the Philippines have invested in flash-steam power plants, and today the nation is second only to the United States in its use of geothermal energy. In fact, the largest single geothermal power plant is a flash-steam facility in Malitbog, Philippines.

    Binary Cycle Power Plants
    Binary cycle power plants use a unique process to conserve water and generate heat. Water is heated underground to about 107°-182° C (225°-360° F). The hot water is contained in a pipe, which cycles above ground. The hot water heats a liquid organic compound that has a lower boiling point than water. The organic liquid creates steam, which flows through a turbine and powers a generator to create electricity. The only emission in this process is steam. The water in the pipe is recycled back to the ground, to be re-heated by the Earth and provide heat for the organic compound again.

    The Beowawe Geothermal Facility in the U.S. state of Nevada uses the binary cycle to generate electricity. The organic compound used at the facility is an industrial refrigerant (tetrafluoroethane, a greenhouse gas). This refrigerant has a much lower boiling point than water, meaning it is converted into gas at low temperatures. The gas fuels the turbines, which are connected to electrical generators.

    Enhanced Geothermal Systems
    The Earth has virtually endless amounts of energy and heat beneath its surface. However, it is not possible to use it as energy unless the underground areas are "hydrothermal." This means the underground areas are not only hot, but also contain liquid and are permeable. Many areas do not have all three of these components. An enhanced geothermal system (EGS) uses drilling, fracturing, and injection to provide fluid and permeability in areas that have hot—but dry—underground rock.

    To develop an EGS, an “injection well” is drilled vertically into the ground. Depending on the type of rock, this can be as shallow as 1 kilometer (0.6 mile) to as deep as 4.5 kilometers (2.8 miles). High-pressure cold water is injected into the drilled space, which forces the rock to create new fractures, expand existing fractures, or dissolve. This creates a reservoir of underground fluid.

    Water is pumped through the injection well and absorbs the rocks’ heat as it flows through the reservoir. This hot water, called brine, is then piped back up to Earth’s surface through a “production well.” The heated brine is contained in a pipe. It warms a secondary fluid that has a low boiling point, which evaporates to steam and powers a turbine. The brine cools off, and cycles back down through the injection well to absorb underground heat again. There are no gaseous emissions besides the water vapor from the evaporated liquid.

    Pumping water into the ground for EGSs can cause seismic activity, or small earthquakes. In Basel, Switzerland, the injection process caused hundreds of tiny earthquakes that grew to more significant seismic activity even after the water injection was halted. This led to the geothermal project being canceled in 2009.

    Geothermal Energy and the Environment

    Geothermal energy is a renewable resource. The Earth has been emitting heat for about 4.5 billion years, and will continue to emit heat for billions of years into the future because of the ongoing radioactive decay in the Earth’s core.

    However, most wells that extract the heat will eventually cool, especially if heat is extracted more quickly than it is given time to replenish. Larderello, Italy, site of the world’s first electrical plant supplied by geothermal energy, has seen its steam pressure fall by more than 25% since the 1950s.

    Re-injecting water can sometimes help a cooling geothermal site last longer. However, this process can cause “micro-earthquakes.” Although most of these are too small to be felt by people or register on a scale of magnitude, sometimes the ground can quake at more threatening levels and cause the geothermal project to shut down, as it did in Basel, Switzerland.

    Geothermal systems do not require enormous amounts of freshwater. In binary systems, water is only used as a heating agent, and is not exposed or evaporated. It can be recycled, used for other purposes, or released into the atmosphere as non-toxic steam. However, if the geothermal fluid is not contained and recycled in a pipe, it can absorb harmful substances such as arsenic, boron, and fluoride. These toxic substances can be carried to the surface and released when the water evaporates. In addition, if the fluid leaks to other underground water systems, it can contaminate clean sources of drinking water and aquatic habitats.

    There are many advantages to using geothermal energy either directly or indirectly:
    •    Geothermal energy is renewable; it is not a fossil fuel that will be eventually used up. The Earth is continuously radiating heat out from its core, and will continue to do so for billions of years.
    •    Some form of geothermal energy can be accessed and harvested anywhere in the world.
    •    Using geothermal energy is relatively clean. Most systems only emit water vapor, although some emit very small amounts of sulfur dioxide, nitrous oxides, and particulates.
    •    Geothermal power plants can last for decades and possibly centuries. If a reservoir is managed properly, the amount of extracted energy can be balanced with the rock’s rate of renewing its heat.
    •    Unlike other renewable energy sources, geothermal systems are “baseload.” This means they can work in the summer or winter, and are not dependent on changing factors such as the presence of wind or sun. Geothermal power plants produce electricity or heat 24 hours a day, 7 days a week.
    •    The space it takes to build a geothermal facility is much more compact than other power plants. To produce a GWh (a gigawatt hour, or one million kilowatts of energy for one hour, an enormous amount of energy), a geothermal plant uses the equivalent of about 1,046 square kilometers (404 square miles) of land. To produce the same GWh, wind energy requires 3,458 square kilometers (1,335 square miles), a solar photovoltaic center requires 8,384 square kilometers (3,237 square miles), and coal plants use about 9,433 square kilometers (3,642 square miles).
    •    Geothermal energy systems are adaptable to many different conditions. They can be used to heat, cool, or power individual homes, whole districts, or industrial processes.

    Harvesting geothermal energy still poses many challenges:
    •    The process of injecting high-pressure streams of water into the Earth can result in minor seismic activity, or small earthquakes.
    •    Geothermal plants have been linked to subsidence, or the slow sinking of land. This happens as the underground fractures collapse upon themselves. In some areas of New Zealand, the ground under a geothermal power plant subsides at a rate of almost a half a meter (1.6 feet) every year. This can lead to damaged pipelines, roadways, buildings, and natural drainage systems.
    •    Geothermal plants can release small amounts of greenhouse gases such as hydrogen sulfide and carbon dioxide.
    •    Water that flows through underground reservoirs can pick up trace amounts of toxic elements such as arsenic, mercury, and selenium. These harmful substances can be leaked to water sources if the geothermal system is not properly insulated.
    •    Although the process requires almost no fuel to run, the initial cost of installing geothermal technology is expensive. Developing countries may not have the sophisticated infrastructure or start-up costs to invest in a geothermal power plant. Several facilities in the Philippines, for example, were made possible by investments from American industry and government agencies. Today, the plants are Philippine-owned and operated.

    Geothermal Energy and People

    Geothermal energy exists in different forms all over the Earth (by steam vents, lava, geysers, or simply dry heat), and there are different possibilities for extracting and using this heat.

    In New Zealand, natural geysers and steam vents heat swimming pools, homes, greenhouses, and prawn farms. New Zealanders also use dry geothermal heat to dry timber and feedstock.

    Other countries, such as Iceland, have taken advantage of molten rock and magma resources from volcanic activity to provide heat for homes and buildings. In Iceland, almost 90% of the country’s people use geothermal heating resources. Iceland also relies on its natural geysers to melt snow, warm fisheries, and heat greenhouses.

    The United States generates the most amount of geothermal energy of any other country. Every year, the U.S. generates about 15 billion kilowatt-hours, or the equivalent of burning about 25 million barrels of oil. Industrial geothermal technologies have been concentrated in the western U.S. In 2012, Nevada had 59 geothermal projects either operational or in development, followed by California with 31 projects, and Oregon with 16 projects.

    The cost of geothermal energy technology has gone down in the last decade, and is becoming more economically possible for individuals and companies.

  • Term Part of Speech Definition Encyclopedic Entry
    antifreeze Noun

    liquid used to lower the freezing point of a cooling substance.

    aquifer Noun

    an underground layer of rock or earth which holds groundwater.

    Encyclopedic Entry: aquifer
    baseload Adjective

    type of power plant that runs at near-full capacity 24 hours a day, every day.

    bedrock Noun

    solid rock beneath the Earth's soil and sand.

    Encyclopedic Entry: bedrock
    binary cycle power plant Noun

    geothermal power plant that uses heated underground water to warm a fluid with a lower boiling point than water, which creates a steam that powers turbines and electrical generators.

    brine Noun

    water or other fluid pumped through an enhanced geothermal system (EGS).

    byproduct Noun

    substance that is created by the production of another material.

    coal Noun

    dark, solid fossil fuel mined from the earth.

    compact Verb

    to pack tightly together.

    co-produced geothermal energy Noun

    heat obtained from the steam and hot water produced as a byproduct of petroleum and natural gas wells.

    core Noun

    the extremely hot center of Earth, another planet, or a star.

    Encyclopedic Entry: core
    dry-steam power plant Noun

    geothermal power plant that uses natural pockets of steam to drive turbines and electrical generators.

    earthquake Noun

    the sudden shaking of Earth's crust caused by the release of energy along fault lines or from volcanic activity.

    electricity Noun

    set of physical phenomena associated with the presence and flow of electric charge.

    element Noun

    chemical that cannot be separated into simpler substances.

    emission Noun

    discharge or release.

    engineering Noun

    the art and science of building, maintaining, moving, and demolishing structures.

    enhanced geothermal system (EGS) Noun

    geothermal power plant where water or another fluid is injected into bedrock, sometimes causing fracturing and creating reservoirs of geothermal heat.

    evaporate Verb

    to change from a liquid to a gas or vapor.

    flash-steam power plant Noun

    geothermal power plant where fluid at temperatures greater than 182 degrees Celsius (360 degrees Fahrenheit) is pumped under high pressure into a tank held at a much lower pressure, causing some of the fluid to rapidly vaporize, or "flash." The vapor drives a turbine, which drives an electrical generator.

    friction Noun

    force produced by rubbing one thing against another.

    frigid Adjective

    very cold.

    geothermal energy Noun

    heat energy generated within the Earth.

    geothermal gradient Noun

    gradual change in temperature from the Earth's core (hot) to its crust (cool), about 25 degrees Celsus per kilometer of depth/1 degree Fahrenheit per 70 feet of depth.

    geothermal heat pump (GHP) Noun

    heating or cooling system that pipes water in a continuous loop from wells drilled into the Earth through the space being heated or cooled, and back again.

    geyser Noun

    natural hot spring that sometimes erupts with water or steam.

    Encyclopedic Entry: geyser
    gravitational pull Noun

    the physical attraction between two objects.

    greenhouse gas Noun

    gas in the atmosphere, such as carbon dioxide, methane, water vapor, and ozone, that absorbs solar heat reflected by the surface of the Earth, warming the atmosphere.

    habitat Noun

    environment where an organism lives throughout the year or for shorter periods of time.

    Encyclopedic Entry: habitat
    hot spring Noun

    small flow of water flowing naturally from an underground water source heated by hot or molten rock.

    hydrothermal Adjective

    related to hot water, especially water heated by the Earth's internal temperature.

    impoverished Adjective

    very poor.

    income Noun

    wages, salary, or amount of money earned.

    infrastructure Noun

    structures and facilities necessary for the functioning of a society, such as roads.

    isolate Verb

    to set one thing or organism apart from others.

    isotope Noun

    atom with an unbalanced number of neutrons in its nucleus, giving it a different atomic weight than other atoms of the same element.

    lava Noun

    molten rock, or magma, that erupts from volcanoes or fissures in the Earth's surface.

    low-temperature geothermal energy Noun

    heat obtained from underground fluids (usually water) of 150 degrees Celsius (300 degrees Fahrenheit) or less.

    magma Noun

    molten, or partially melted, rock beneath the Earth's surface.

    Encyclopedic Entry: magma
    mantle Noun

    middle layer of the Earth, made of mostly solid rock.

    Encyclopedic Entry: mantle
    mud pot Noun

    natural spring filled with hot, bubbling mud.

    Native American Noun

    person whose ancestors were native inhabitants of North or South America. Native American usually does not include Eskimo or Hawaiian people.

    natural gas Noun

    type of fossil fuel made up mostly of the gas methane.

    Encyclopedic Entry: natural gas
    neutron Noun

    particle in an atom having no electrical charge.

    permeable Adjective

    allowing liquid and gases to pass through.

    petroleum Noun

    fossil fuel formed from the remains of ancient organisms. Also called crude oil.

    photovoltaic Adjective

    able to convert solar radiation to electrical energy.

    portable Adjective

    able to be easily transported from one place to another.

    radioactive Adjective

    having unstable atomic nuclei and emitting subatomic particles and radiation.

    recuperate Verb

    to recover from an injury or strenuous activity.

    refuge Noun

    public land set aside to protect native wildlife.

    renewable resource Noun

    resource that can replenish itself at a similar rate to its use by people.

    Ring of Fire Noun

    horseshoe-shaped string of volcanoes and earthquake sites around edges of the Pacific Ocean.

    Encyclopedic Entry: Ring of Fire
    sophisticated Adjective

    knowledgeable or complex.

    spa Noun

    facility, usually with mineral hot springs, offering health benefits.

    steam Verb

    to heat something by placing it over boiling water.

    subsidence Noun

    sinking or lowering of the Earth's surface, either by natural or man-made processes.

    technology Noun

    the science of using tools and complex machines to make human life easier or more profitable.

    toxic Adjective


    turbine Noun

    machine that captures the energy of a moving fluid, such as air or water.

    vent Noun

    crack in the Earth's crust that spews hot gases and mineral-rich water.

    wind energy Noun

    energy produced by the movement of air, and converted into electricity.

Tell us what you think